Business Continuity FAA Internet Failover Internet Resilience Network Infrastructure Network Resilience
Nov 15, 2026

FAA Network Outage: What Businesses Can Learn About Internet Resilience

The FAA network outage offers a powerful lesson for businesses: modern infrastructure matters, but resilience comes from designing networks around the possibility of failure.

FAA network outage and business internet resilience

On November 13, 2026, a telecommunications problem inside one of the most sophisticated aviation systems in the world led the U.S. Federal Aviation Administration (FAA) to issue a nationwide ground stop.

The scale was remarkable.

According to the FAA's account of the incident, instability affected 17 of its 22 Air Route Traffic Control Centers. Approximately 3,500 aircraft were in the air when the ground stop was implemented. Flights already airborne landed safely, but the disruption rippled across the U.S. aviation system.

The immediate lesson might appear obvious: aging infrastructure needs to be replaced.

But there is a more important lesson for businesses.

Modern infrastructure matters. But resilience comes from designing systems around the possibility of failure.

What actually happened to the FAA network?

The FAA has been careful to distinguish the November 13 incident from its broader modernization program.

The agency operates telecommunications infrastructure that still includes legacy Time Division Multiplexing (TDM) technology and copper circuits. That infrastructure is being transitioned toward modern fibre and IP-based networking.

During work at remote FAA facilities, the telecommunications network began receiving an extraordinary volume of connection attempts — approximately 1,000 every four to five seconds.

The resulting data flood destabilized the network, creating inconsistencies in aircraft communications and some radar feeds.

The FAA's initial investigation identified two potential originating locations: a radar site in Amarillo, Texas, and a radio communications site in El Dorado, Arkansas. Its network service provider, L3Harris, had been performing work at the El Dorado location, including deployment of a new router.

The two locations were isolated and the network stabilized. As a precaution, the FAA subsequently disabled the same functionality on approximately 60 similar routers while the investigation continued.

The U.S. Department of Transportation's subsequent update provided additional context: the FAA is in the process of moving legacy telecommunications infrastructure from copper to fibre and from TDM to IP.

This distinction matters.

The failure was not simply "old copper went down."

Nor does it mean that replacing copper with fibre is the wrong strategy. The FAA says its aging copper infrastructure is becoming obsolete and modernization is necessary.

Instead, the incident illustrates something network engineers understand very well:

Complex systems can fail in unexpected ways — including while they are being improved.

New technology does not eliminate failure

Businesses often think about network reliability primarily in terms of the quality of their internet connection.

Fibre is more reliable than many older technologies.

Dedicated Internet Access can provide stronger service commitments than conventional broadband.

Modern routers are more capable than the equipment they replace.

All of those things matter.

But none of them makes failure impossible.

A fibre cable can be cut.

A carrier can experience a routing problem.

A router or firewall can malfunction.

A software update can introduce an unexpected issue.

Power can fail.

Construction can damage infrastructure.

And, as the FAA incident demonstrates, changes being made to improve a network can themselves create unexpected behaviour.

The more dependent an organization becomes on connectivity, the more important a different question becomes:

What happens when the primary network doesn't behave as expected?

Reliability and resilience are not the same thing

A reliable network is designed not to fail.

A resilient network is designed to continue operating when something does fail.

That distinction is increasingly important because internet connectivity is no longer simply a way for employees to browse the web.

For many businesses, the connection supports:

  • payment processing and point-of-sale systems

  • cloud applications

  • Microsoft 365 and collaboration tools

  • VoIP communications

  • VPN and remote access

  • security and monitoring systems

  • customer-facing applications

  • operational systems and connected devices

When the network stops, parts of the business may stop with it.

That changes the economics of connectivity.

The question is no longer simply:

How fast is our Internet connection?

It becomes:

How long can our business operate without it?

A second connection isn't necessarily resilience

The obvious response is to install another internet connection.

That can be an important part of the solution — but only if the second path reduces the same risks that could take down the first.

Two fibre connections entering a building through the same telecommunications infrastructure may share physical dependencies.

Two services purchased from different providers may ultimately depend on common upstream infrastructure.

A backup connection that requires someone to manually reconfigure the network during an outage may technically exist, but still leave the business offline when the failure actually occurs.

And a backup connection that has never been tested may provide a false sense of security.

True continuity requires looking at the architecture rather than simply counting connections.

That means understanding the primary connection, the alternate path, carrier dependencies, physical diversity where appropriate, automatic failover, power, equipment, monitoring and what applications actually need to remain operational.

The FAA operates at a completely different scale. The principle is the same.

A Canadian retailer, professional office, construction company or manufacturer obviously does not operate anything remotely comparable to the U.S. air traffic control system.

The comparison should not be overstated.

The FAA manages extraordinarily complex, safety-critical national infrastructure with requirements far beyond those of a commercial business.

But the underlying continuity principle applies at every scale:

If connectivity is critical to the operation, plan for the moment when the primary path is unavailable or unstable.

For a national aviation system, that requires enormous engineering resources, operational procedures and multiple layers of redundancy.

For a business location, the architecture can be much simpler.

The objective is the same: identify critical dependencies, understand likely failure points and create an independent path that can maintain essential operations.

This is why Zing5G focuses on continuity, not just connectivity

Zing5G works with Canadian businesses to design connectivity around operational requirements rather than simply selling another internet circuit.

Sometimes the right starting point is better primary connectivity.

Sometimes it is an independent backup connection.

Sometimes the problem is that a business already has multiple connections but doesn't know whether the architecture actually provides meaningful redundancy.

And sometimes the first step is simply understanding where the risk exists.

NETHealth™ reviews a business's existing internet, failover readiness, network performance and business-critical applications to identify connectivity risks and determine what should be improved first.

Where automatic failover is appropriate, AlwaysNET™ provides a managed secondary connectivity path designed to automatically take over when the primary internet connection fails.

The goal isn't necessarily to replace the primary carrier.

It is to create an independent continuity layer around the connectivity the business already depends on.

Design for failure before failure happens

The FAA incident will be studied in far greater technical detail than most business network outages ever will.

It should be.

But Canadian businesses don't need an aviation-scale network failure to learn from the underlying principle.

As organizations move more applications, communications, payments and operations into connected systems, the cost of losing connectivity continues to increase.

Replacing old infrastructure is important.

Buying reliable primary connectivity is important.

Choosing good equipment is important.

But resilience requires another step:

Assume that something will eventually fail — and decide in advance what happens next.

That is the difference between having internet access and having a business continuity strategy.

Zing5G works with Canadian organizations across a range of operating environments where connectivity and continuity matter. See how customers are using Zing5G solutions, or start with a NETHealth™ network assessment to understand where your connectivity may be exposed.

Updated November 15, 2026